Tormek WM-200 Pro-AngleMaster

Tormek WM-200 Pro-AngleMaster

The Tormek WM-200 AngleMaster has several smart features. You can use it to set the jig before sharpening, or to measure an existing bevel angle of a tool. It can also be adjusted to the diameter of the grinding wheel, and you can easily set the sharpening angle for sharpening on the side of a diamond grinding wheel as well.

The WM-200 gives angle setting with pin point accuracy from 15 to 75 on grindstones of 6" to 10" in diameter, thus taking into account wear after years of use. The WM-200 is also provided with angle checking notches around its edge to enable bevel angles to be repeated or progress checked. (Supplied as standard with 1206, 2006 and T-8).

Features:
Angle setting with pin point accuracy
For grindstones of 6 to 10
Angle checking notches
Measures the existing bevel angle of the tool
Set the jig to the desired sharpening angle before sharpening
Easy to use
Works on grinding wheels from 150 mm (5 7/8") to 250 mm (9 7/8") in diameter

Works with the Tormek T-8, Tormek T-4 and older models.