Tormek SVS-50 Multi-Jig

Tormek SVS-50 Multi-Jig

This is a very comprehensive jig which can be used equally well for turning and carving tools. There are two holders provided, one for turners' skew chisels, either oval or square section, from 13mm to 35mm wide, and the other for carvers' skew chisels, parting tools, roughing gouges and wide carving gouges up to 50mm wide. Great for replication of the shape on turning skew chisels with a straight or curved edge.

This jig is called the "Multi Jig" for a very good reason. It consists of a housing with two interchangeable seats for different types of tools; the open seat and the closed seat, which practically gives you two jigs in one. You can use the SVS-50 Multi Jig to sharpen straight and round-edged woodturning chisels, as well as parting tools, roughing gouges and woodcarving gouges and chisels.

Features:
Can be used for turning and carving tools
Two holders
Universal support in horizontal base
It's like two jigs in one – sharpen all your woodturning chisels, parting tools, roughing gouges and more.
Easy to use – just turn the jig over to grind the second bevel without resetting the jig.
Includes PL-01 Profile Labels for easy setup and precise repeatability.

Works with the Tormek T-8, Tormek T-4 and older models.