Trend C184AX1/2TC Guided Ogee Raiser & Back Cut R22

Panel raiser cutters for producing the panel for cabinet panelled doors.
The tool is fitted with a back cutter to ensure a maximum panel tongue thickness of 6.3mm.
Must be used in a stationary variable speed router either mounted overhead or inverted in a router table at a reduced speed. For use on natural timber and MDF.
Take several passes by adjusting back fence position with each pass.
Stationary use only.
Back cutter must be fitted at 90 degrees to main tool to reduce the cutting impact.

Dimensions:
D=85.73 mm
d=54 mm
C=5/8 inch
C=16 mm
B=16 mm
B2=31.8 mm
R=22.2 mm
Tongue=6.3 mm
Reveal=27 & 34.9 mm
OL=78.5 mm
Shank Diameter=1/2 inch
Timber thickness min.=18 mm*
Timber thickness max.=25.4 mm
*(back of panel will not need back cutting)

Shank Diameter: 1/2
Diameter Metric: 88.9
Diameter 2 Metric: 54
Cut Length Imperial: 5/8
Cut Length Metric: 16
Overall Length Metric: 78.5
Bearing Diameter Metric: 16