TREND 46/23X1/2TC GUIDE TRIMMER 90DEG 12.7MM DIA
Product Code: 46/23X1/2TC
£101.61
Inc VAT
ADD TO BASKET
Self-guiding trimmers with bearings mounted on end of cutter.
For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board.
An approximate 3mm overlap should be left before copy profiling.
When using plastic laminate adhesive to dry before trimming.
This avoids clogging the guide bearing.
Refs. T46/1, 46/2 and 46/20 are downcut to prevent breakout on veneer.
Ref. 46/211 has a sleeved bearing to allow for regrinds in case of resharpening.
Dimensions:
D=12.7 mm
C=50 mm
B=12.7 mm
A=90 degrees
Shank Diameter=1/2 inch
Shank Diameter: 1/2
Diameter Metric: 12.7
Cut Length Metric: 50
Bearing Diameter Metric: 12.7
For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board.
An approximate 3mm overlap should be left before copy profiling.
When using plastic laminate adhesive to dry before trimming.
This avoids clogging the guide bearing.
Refs. T46/1, 46/2 and 46/20 are downcut to prevent breakout on veneer.
Ref. 46/211 has a sleeved bearing to allow for regrinds in case of resharpening.
Dimensions:
D=12.7 mm
C=50 mm
B=12.7 mm
A=90 degrees
Shank Diameter=1/2 inch
Shank Diameter: 1/2
Diameter Metric: 12.7
Cut Length Metric: 50
Bearing Diameter Metric: 12.7
