Makita DLX2455TJ 18v LXT Twin Combi Drill & Impact Driver Kit

The Makita DLX2412TJ twin kit features two heavy duty and compact tools - DHP486 Combi Drill & DTD172 Impact Driver. 

Supplied with 2x 18v 5.0Ah BL1850 Batteries, 1x DC18RC Compact Charger and 1x Makpac Connector Carry Case (821551-8 Type 3).

DHP486 18V LXT Brushless heavy duty combi drill
The Makita DHP486 18V LXT Brushless Hammer Driver Drill provides 130Nm of maximum fastening torque and no load speed of 2,100rpm combining rapid drilling speeds with high levels of torque. This model is based on the DHP481, but has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications. Not only has the performance on the DHP481 been increased but it is also considerably shorter. At 178mm in length this model is 27mm shorter than the DHP481. Making it the most compact drill in its class and extremely comfortable to use in all applications.

DHP486 Features
Massive drilling capacity with 152mm hole saw & 50mm auger bit capacity
Compact overall length of only 178mm for use in narrow work spaces
High powered Brushless Motor produces 130Nm peak torque
High durability aluminium gear housing
Mechanical 2 speed gearing with all metal gear construction
Forward / reverse rotation
Single sleeve keyless chuck allows for easy bit installation/removal by one hand
Electric brake
Variable speed control by trigger
Best possible ergonomic handle for drill-driver applications
LED job light
Belt clip
XPT - Extreme Protection Technology

DHP486 Specification
Voltage: 18v
Soft Application Max Torque (Nm): 65
Hard Application Max Torque (Nm): 130
Torque Settings: 21 + Drill
Brake Type: Electric
No. of Gears: 2
LED Job Light: Yes / Twin / Pre-glow / After-glow
Battery Capacity Indicator: No
Battery Compatibility: 18v Lithium-Ion (LXT)
Rotation: Forward / Reverse
Variable Speed Control Trigger: Yes
No Load Speed (RPM) High: 0-2100
No Load Speed (RPM) Med: N/A
No Load Speed (RPM) Low: 0-550
Chuck Type: 3-Jaw / Single Sleeve Keyless / All Metal
Chuck Capacity (mm): 13
Screw Capacity: Machine Screw (mm): 6
Screw Capacity: Wood Screw (mm): 10 x 90
Drill Capacity: Concrete (mm): 16
Drill Capacity: Metal (mm): 13
Drill Capacity: Wood (mm): 76
Impact Rate (BPM) High: 0-31500
Impact Rate (BPM) Med: N/A
Impact Rate (BPM) Low: 0-8250
Overall Length (mm): 178
Net Weight (Approx. Kg) with 1.5/2Ah Batt: 2.3
Net Weight (Approx. Kg) with 3/4/5Ah Batt: 2.7
Brushless Motor: Yes
DHP486 NOISE & VIBRATION
Sound Pressure Level (LpA): 84 dB (A)
Sound Power Level (LWA): 95 dB (A)
Sound Uncertainty (K): 3 dB (A)
Drilling Concrete Vibration Emission (ah): 8.0 m/s²
Drilling Concrete Vibration Uncertainty (K): 1.5 m/s²
Drilling Metal Vibration Emission (ah): 2.5 m/s²
Drilling Metal Vibration Uncertainty (K): 1.5 m/s²

DTD172 18V LXT Cordless brushless impact driver
The DTD172 is a brushless impact driver powered by an 18v LXT Li-Ion battery.

Key features include a LED job light with pre-glow & after glow function, and a new one-touch bit installation. 

DTD172 Features
Electric brake
Variable speed control by trigger
Reverse switch
Quick mode switching button
LED job light with pre-glow and after glow function
Slim tool body
Anti bit-wobbling structure
Compact tool body with a shorter overall length of 114mm
New one-touch bit installation
Electronic 4 stage impact power selection
Ergonomically designed handle

Specification
Voltage: 18v
Max Fastening Torque (Nm): 180
Brake Type: Electric
Battery Compatibility: 18v Lithium-Ion (LXT)
Variable Speed Control Trigger: Yes
Machine Screw Capacity: M4-M8
Standard Bolt Capacity: M5-M16
High Tensile Bolt Capacity: M5 - M14
Coarse Thread Length Capacity (mm): 22-125
Max. Impacts Per Minute (ipm): 0-3800
Driving Shank: 6.35mm 1/4" Hex
Net Weight: 1.2 - 1.5 kg
Brushless Motor: Yes
DTD172 NOISE & VIBRATION
Vibration K Factor: 1.5 m/sec²
Noise Sound Pressure: 97 dB(A)
Noise Sound Power: 108 dB(A)
Noise K Factor: 3 dB(A)