Festool 577971 MB 40-Set Mobile Drilling Attachment with Case

Festool 577971 MB 40-Set Mobile Drilling Attachment with Case

The Festool 577971 MB 40-Set Mobile Drilling Attachment is quite a cool addition to your tool kit accessories – especially if your need to repeat drilling actions or drill at precise angles.

Suitable for CXS/TXS 12, CXS/TXS 18, TPC 18/4, TDC 18/4, C 18 and T 18 with FastFix support (not for CXS/TXS)

As a compact drilling aid, it enables you to drill at right angles with pinpoint accuracy and repeat accuracy, no matter where you are working. Versatile stops and exact depth adjustment allow you to drill vertical holes, end face holes and a series of holes.

For a good view of the drilling point, you can couple the dust extraction directly with the base plate. As a further FastFix attachment, it is ideally suited to your drilling applications in wood, metal and plastic, thus expanding the range of possible uses for your Festool cordless drills.

The tool chuck can be fitted quickly and without tools. The CENTROTEC chuck also enables quick insertion and replacement of drilling tools.

For depth-limited holes up to 50 mm, such as series of holes or cupboard hinges, the exact plunge depth into the material can be set in mm or inches using the scale.  For holes in the 32 mm system with a 3 mm hole series pin and a 5 mm hole series pin. The pin stays in the same spot throughout the hole series project. No need to switch the pin.

For fast drilling in a line, the adapter can be attached to all Festool guide rails without tools.

Features:
Built to be robust and stable for exact holes.
With parallel side fence and stop for end face holes, for drilling holes exactly and with repeat accuracy
The tool chuck can be fitted quickly and without tools.
Markings on the base plate simplify exact alignment on the workpiece.
Rubberised base for precise alignment without slipping.

Includes:
1x FSA-MB 40 guide rail adapter
1x PA-MB 40 parallel side fence incl. stop for end face holes
1x hole series pin 5.0mm
1x hole series pin 3.0mm
1x TX15 Key
1x SYS3 M 187 Systainer Case