Trend Belfast Sink Jig

Trend Belfast Sink Jig

·         For routing Belfast /Butler sinks.

·         Made from 12mm hardwearing CNC machined phenolic.

·         Will also allow drip channel groove to be routed on the underside of the worktop.

·         Corner radius of 25mm. Maximum distance 630mm or 1030mm when overlapping slots.

·         For sinks 1050mm wide and 440mm to 515mm deep.

·         Twin pin location for stable and accurate lining up of jig. Preset holes for 340mm, 360mm, 380mm, 400mm, 420mm, 440mm, 480mm and 500mm width, a packing piece required for sizes in between.

·         Jig requires: A portable plunge router with 12.7mm (1/2 inch) shank capacity and minimum 1300 watts.

·         A template guide bush with 30mm outside diameter for main recess and 16mm outside diameter for water drip groove.

·         A TCT router cutter with 12.7mm (1/2 inch) diameter and 50mm (2 inch) cut length for main recess and a radius cytter R2.5mm for the water drip groove.

·         Two 100mm (4 inch) throat clamps.

Supplied with clear & comprehensive instructions for use.

Specifications:

·         Length - 655mm

·         Width - 600mm

·         Thickness - 12mm

·         Weight - 3.6kg

·          

Includes:

·         6 x 10mm pins