Romford Tools 18v Brushless Makita Kit

Includes:
Makita DHP484Z 18v LXT Brushless 2-Speed Combi Drill
Makita DTD153Z 18V Brushless Impact Driver
Makita DHR242Z 18v SDS+ Cordless Rotary Hammer Drill
Makita DHS660Z 18v LXT 165mm Brushless Circular Saw 
Makita DJV182Z 18v LXT Li-ion Brushless Jigsaw
Makita DGA463Z 18v Brushless Slide Switch 115mm Angle Grinder
3 x Makita BL1850 18v Li-ion 5.0Ah Battery
Makita DC18RC 18v Li-Ion Battery Charger
Makita LXT600 Duffel Tool Bag

Makita DHP484Z 18v LXT Brushless 2-Speed Combi Drill Features:
Brushless motor
Electric brake
2 mechanical gears
Variable speed control by trigger
Forward/reverse rotation
LED job light
Compact design with an overall length of 182mm
Keyless chuck
Aluminium gear housing
All metal gear construction
Ergonomic soft grip
Belt clip
Specifications:
Voltage: 18v
Soft Application Max Torque (Nm): 30
Hard Application Max Torque (Nm): 54
Torque Settings: 21 + Drill
Brake Type: Electric
No. of Gears: 2
LED Job Light: Yes / Pre-glow
Battery Compatibility: 18v Lithium-Ion (LXT)
Rotation: Forward / Reverse
Variable Speed Control Trigger: Yes
No Load Speed (RPM) High: 0-2000
No Load Speed (RPM) Med: N/A
No Load Speed (RPM) Low: 0-500
Chuck Type: 3-Jaw / Single Sleeve Keyless
Chuck Capacity (mm): 13
Screw Capacity: Machine Screw (mm): 6
Screw Capacity: Wood Screw (mm): 10 x 90
Drill Capacity: Concrete (mm): 13
Drill Capacity: Metal (mm): 13
Drill Capacity: Wood (mm): 38
Net Weight (Approx. Kg) with 1.5/2Ah Batt: 1.6
Net Weight (Approx. Kg) with 3/4/5Ah Batt: 1.8

Makita DTD153Z 18V Brushless Impact Driver Features:
Cordless impact drill 18V
Li -ion batteries
Ultra-compact
High-capacity brushless motor
Body Only
170Nm Torque
Specifications:
Machine screw : M4 – M8 (5/32” – 5/16”)
Standard bolt : M5 – M16 (3/16” – 5/8”)
High strength bolt : M5 – M14 (3/16” – 9/16”)
Coarse thread (in length) : 22 – 125mm (7/8” – 4-7/8”)
Impacts per minute (ipm) 0 – 3,600 No load speed 0 – 3,400
Max. Fastening Torque 170N.m (1,500 in.lbs)
Dimensions (L x W x H) 126 x 79 x 238mm (5? x 3-1/8? x 9-3/8?)
Net Weight 1.3kg (2.8lbs)

Makita DHR242Z 18v SDS+ Cordless Rotary Hammer Drill Features:
Able to drill in concrete as fast or faster than 24V Cordless Combination Hammer model BHR200
One touch slide chuck for SDS-plus bit
Easy-to-grip handle
Ergonomically designed to give maximum power thrust
Provides a sure and comfortable grip in any operation; overhead application, drilling with palm-up or palm-down grip
3 mode operation: Rotation + Hammering, Hammering only & Rotation only
The tool body is separated into the upper and lower housings at the foot of handle portion where the housings are jointed with vibration absorbing cushion rubbers
Higher productivity than model BHR202 achieved by using efficient Brushless DC motor to reduce energy loss by 30% giving longer run times between battery charges
Unique rubber joint construction suppresses the transmission of vibration to battery terminals, minimizing battery failures such as terminal breakage or poor electrical contact
Specifications:
Max in Steel: 13mm
Max in Wood: 27mm
Max in Concrete: 24mm
No Load Speed: 0-950rpm
Blows per minute: 0-4,700bpm
Single impact energy: 2.4J
Vibration: 15/sec2
Charging Time: Approx 22 min

Makita DHS660Z 18v LXT 165mm Brushless Circular Saw Features:
Electric brake
LED job light
Soft Start
Brushless motor
Aluminium base with 45 and 50 degrees bevel cutting capacity
Compact and lightweight design
Rear-facing exhaust port
Lock-off button to prevent accidental start-up
Blower function blows sawdust off the cut line ahead for a better cutting view
Automatic Torque Drive Technology: Automatically changes the cutting speed according to load condition for optimum operation
Indication lamp for ADT: High torque = green light on, High speed = lights out, Overload alert = blinks green
Improved visibility of blade tip
Easy to read scale markings for easier adjustments
Specifications:
Type - Saws
Voltage: 18V
Blade Diameter: 165mm
Bore Diameter: 20mm
Max Cutting Capacity at 0°: 57mm
Max Cutting Capacity at 45°: 41mm
Max Cutting Capacity at 50°: 37mm
No Load Speed: 5,000rpm
Net Weight: 2.9–3.2kg
Vibration Cutting Wood: 2.5 m/s²
Vibration K Factor: 1.5 m/s²
Sound Pressure 93 dB(A)
Sound Power Level 104 dB(A)
Sound K Factor: 3dB(A)

Makita DJV182Z 18v LXT Li-ion Brushless Jigsaw Features:
This DJV182 is a makita D handle jigsaw, which has a different design to its brother the DJV181 that is designed with a barrel handle. This model features a trigger switch to operate and an electrical lock off button atop the handle allowing you to lock on a function.
At just 266mm in length the DJV182 is incredible compact and it weighs in at just 2.6Kgs when a battery is attached.
The DJV182 jigsaw has 3 orbital settings allowing for customised cuts, as well as a straight cut mode. The Aluminium base has a bevel range of 0 to 45 degrees.
You can easily attach a dust extractor to this brushless makita jigsaw by attaching the included nozzle to the sawdust exhaust port situated at the rear of the tool.
Specifications:
3 Position Orbital Action
Tool Free Blade Change
26mm Stroke Length
Max Cutting Capacity 135mm (Wood)
Max Cutting Capacity 10mm (Metal)
No Load Speed 0-3500rpm

Makita DGA463Z 18v Brushless Slide Switch 115mm Angle Grinder Features:
Electric Brake stops the grinding or cut-off wheel in 2 seconds or less for maximum productivity
"Active Feedback sensing Technology" turns the motor off if rotation speed suddenly slows or wheel is forced to stop
"Automatic Torque Drive Technology" adjusts speed and torque during operation for optimum performance
The BL Brushless Motor eliminates carbon brushes, enabling it to run cooler and more efficiently for longer life
Variable speed control dial allows manual RPM adjustment (3,000-8,500) to match the speed to the application
Slide switch with lock-on for operator convenience
Soft start suppresses start-up reaction for smooth start-ups and longer gear life
Anti-restart protection engineered to prevent motor start up when battery is inserted with paddle switch in the on position
Efficient Brushless motor is electronically controlled to optimise battery energy use for up to 50% longer run time per charge
The electronically-controlled Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application
3-stage L.E.D. gauge indicates battery charge level
Spiral bevel gears for smoother rotations and a more efficient transfer of energy
Removable wire mesh intake covers are engineered to prevent debris from entering motor
Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions
Rubberised soft grip provides increased comfort on the job
Compact and ergonomic design at only 382mm long
Weighs only 3.0 kg with battery (battery not included) for reduced operator fatigue
Specifications:
Voltage: 18v LXT
Wheel Diameter: 115 mm
Bore Diameter: 22.23 mm
Max Wheel Thickness: 7.2 mm
No Load Speed: 3,000 - 8,500 rpm
Switch Type: Slide
Net Weight (inc Battery): 3.0 kg
Sound Pressure: 79 dB(A)
Sound K Factor: 3 dB(A)
Vibration: Surface Grinding: 6.5 m/s²
Vibration: Disc Sanding: 2.5m/s²
Vibration K Factor: 1.5m/s²

Makita BL1850 18v Li-ion 5.0Ah Battery Features:
Up to 66% extra run time compared to BL1830
Compatible with existing fast charger
Computer controlled optimum chargin
Compatible with starred terminal machines
Compatible with yellow terminal machines
Cooling System for max battery life
Battery protection circuit

Makita DC18RC 18v Li-Ion Battery Charger – 110/240v Features:
The DC18RC has a cooling fan and Active 3 Controls
This means that during the loading of the charging voltage, charging current, and temperature is held in the holes
The cooling system blows cool air into the battery
As a result, high temperatures occur in the battery, so that the battery life is extended, and the charging process is accelerated
When used in conjunction with charging adapter ADP03 this charger offers also the possibility of charging Ni-MH slide on batteries of 9.6V to 24V batteries
For when used with charging adapter ADP04 this charger offers the possibility to charge Ni-Cd and Ni-MH rod and block batteries of 7.2V to 18V batteries

Makita LXT600 Duffel Tool Bag Features:
Multiple Interior and Exterior pockets for tools and accessories
Rugged Ballistic Nylon construction
Velcro Exterior pockets
Adjustable Bungie cord on top for added storage
LTX600 Tool Bag Comes with Wheels for easy mobility
Telescoping handle for easy carry with wheels
Ridged bottom w/ rails for stability
Padded bag walls for tool protection
This is the same bag that is supplied with the Makita LXT 600 6 Piece Tool kits.
The ideal way to get your tools to and from the job and to keep them safe while you work
Specifications:
Width: 60cm
Length: 36cm
Height: 30cm