Makita HP001GZ 40v Max XGT Brushless Combi Drill - Body Only
The Makita HP001G is the hammer drill / screwdriver variant of the DF001G XGT Drill Driver. In addition to everything that the DF001G can do, you can also use this machine to drill in stone. Furthermore, it is the same powerful machine, which can work with hose drills up to 50 mm and holesaws up to 152 mm. And of course it is also equipped with Active Feedback sensing Technology (AFT), which automatically switches off the machine when the drill is clamped in the material. This protects your wrist and does not unbalance you. It remains a compactly built machine, even with added hammer drill function.
Supplied body only - this tool requires Makita 40v XGT lithium-ion battery packs to operate.
Say hello to Makita 40v Max XGT - The new standalone system that will stand side-by-side with the industry-leading Makita LXT System. XGT is a genuine solution for high demand industrial applications, a combination of innovative tool design and higher output batteries, providing a genuine solution for high demand industrial users as well.
XGT FEATURES
XGT - A combination of innovative tool design and higher output batteries, providing a genuine solution for high demand industrial users
XGT and LXT will co-exist to provide users with an unmatched line-up of cordless tools for the professional trade
The introduction of a charging adaptor has enabled consumers to charge both LXT & XGT batteries when using the XGT charger
The XGT range of tools and batteries come with a built-in program, providing digital communication between the battery and tool. Allowing not only for the battery to talk with tool but also the tool to talk to the battery
Incorporation of tool design, higher output batteries and built in communication program makes XGT the best high demand system on the market
XGT batteries and tools are built to withstand tough environmental conditions. This means that they have been built to be withstand splashing or spraying water from any angle
The XGT charging system fully charges batteries in as little as 28 minutes
HP001G USER BENEFITS
Brushless motor
Forward / reverse rotation
Single sleeve keyless chuck allows for easy bit installation/removal by one hand
Electric brake
2 mechanical gears
Variable speed control by trigger
LED job light
Active Feedback Sensing Technology (AFT): Shuts down the tool to protect the user if the rotation speed suddenly slows down
Electronic clutch
Digital display for visual confirmation of selected torque
Excellent performance in continuous heavy duty applications
HP001G SPECIFICATION
Voltage: 40v XGT
Power Output (W): TBC
Soft Application Max Torque (Nm): 68
Hard Application Max Torque (Nm): 140
Torque Settings: 21 (Hi) / 41 (Lo) + Drill
Brake Type: Electric
No. of Gears: 2
LED Job Light: Yes / Twin / After-glow
Battery Capacity Indicator: Yes
Battery Compatibility: 40v Max Lithium-Ion (XGT)
Rotation: Forward / Reverse
Variable Speed Control Trigger: Yes
No Load Speed (RPM) High: 0-2600
No Load Speed (RPM) Med: N/A
No Load Speed (RPM) Low: 0-650
Chuck Type: 3-Jaw / Single Sleeve Keyless / All Metal
Chuck Capacity (mm): 13
Screw Capacity: Machine Screw (mm): 6
Screw Capacity: Wood Screw (mm): 10 x 90
Drill Capacity: Concrete (mm): 20
Drill Capacity: Metal (mm): 20
Drill Capacity: Wood (mm): 76
Impact Rate (BPM) High: 0-39000
Impact Rate (BPM) Med: N/A
Impact Rate (BPM) Low: 0-9750
Overall Length (mm): 182
Net Weight (Approx. Kg) with 2.5Ah Batt: 2.7
Net Weight (Approx. Kg) with 4.0Ah Batt: 3.0
Brushless Motor: Yes
HP001G NOISE & VIBRATION
Noise Sound Pressure: 85 dB(A)
Noise Sound Power: 96 dB(A)
Noise K Factor: 3 dB(A)
Vibration K Factor: 1.5 m/sec²
Vibration Impact Drilling in Concrete: 6.0 m/sec²
Vibration Drilling into Metal: 2.5 m/sec² or Less
