The Makita HM1214C is a 10kg-class demolition hammer adapted for SDS-MAX bits. The main features are as follows: AVT (Active dynamic vibration absorber) for reduced vibration during chipping. Suppression of motor speed during no-load for reduced vibration when idling. In-line tool design optimum for downward vertical applications. High work efficiency.
Features:
Anti-Vibration Technology is an internal counterbalance system that greatly reduces vibration and directs more impact energy to the work surface for increased user comfort and greater productivity
Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
Soft start suppresses start-up reaction for more precision and better accuracy
Variable speed control dial enables user to match the speed to the application for greater versatility
L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced
L.E.D. power light indicates switch failure or cord damage
Extended life brushes are longer for more work between service intervals and less downtime
Automatic brush cut-off protects commutator from damage for longer tool life
12 bit angle settings allow the bit to be set at different positions for operating convenience
One-touch chuck allows for quick bit changes
"No hammering when idling" function helps increase tool life
Easy-to-operate slide switch increases productivity and allows for continuous use
Side handle swivels 360° for greater control
Rubberized ergonomic soft grip provides more comfort
Specification:
Impact energy: 19.9 J
Blows per minute: 950 - 1900 bpm
Input wattage: 1500 w
Bit Angle Setting: 12 Stage
Net weight: 11.7 kg
NOISE & VIBRATION:
Noise sound pressure: 78 dB(A)
Noise sound power: 98 dB(A)
Noise K factor: 2.57 dB(A)
Vibration: Chiselling: 8 m/sec
Vibration K factor: 1.5 m/sec