Makita 18v 5 Piece Fully Brushless Kit With 3 x 5.0ah Batteries

Kit Includes:

DHP481 – 18v Brushless Hammer Drill/Driver

DTD154 – 18v Brushless Impact Driver

DGA456 - 18v Brushless 115mm Grinder

DHR242 – 18v Brushless SDS+ Drill

DML802 – 18v LED Torch

3 x 5.0ah Batteries

Charger

3 x MakPac Carry Cases

 

Makita DHP481Z 18V Brushless Combi Drill Features:

Forward/reverse rotation

Single sleeve keyless chuck allows for easy bit installation/removal by one hand.

Electric brake

Twin LED job light with afterglow.

2 mechanical gears.

Battery fuel gauge

Variable speed control by trigger

Best possible ergonomic handle for drill-driver applications.

Compact overall length.

Specifications:

Battery TypeLithium-ion

Body only machine

Chuck Capacity 1.5 - 13 mm

Max. in masonry 16 mm

Max. in steel 13 mm

Max. in wood 76 mm

Blows per Minute (Hi) - ipm 0 - 31,500 ipm

Blows per Minute (Lo) - ipm 0 - 8,250 ipm

Maximum Output 640 w

No Load Speed (Hi) 0 - 2100 rpm

No Load Speed (Lo) 0 - 550 rpm

Torque Settings 21 + drill

Lock Torque 125 Nm

Max. Fastening Torque (Soft Joint) 60 Nm

Max. Fastening Torque (Hard Joint) 115 Nm

Vibration K factor1.5 m/sec

Vibration: Impact drilling into concrete 6.5 m/sec

Vibration: Drilling into metal 2.5

 

Makita DTD154 18v Brushless Impact Driver Features:

Extreme Protection Technology (XPT) offers maximum protection against dust, debris and liquids for optimal performance in extreme conditions

3 stage impact power selection + TEK mode prevents over tightening of fasteners

Super compact with an overall length of only 117mm

One touch sliding chuck for easy bit installation and removal

TEK mode (T-mode) reduces impact power during final stages of fastener seating

Electronic 3-stage impact power selection (Hard/Medium/Soft)

Brushless DC motor with high power to weight and size ratio

Brushless DC motor generates less heat buildup and is ideal for prolonged use in manufacturing production applications

Battery protection system provides over-discharge, temperature and current protection forenhanced performance, battery cycle life and overall battery life

Twin LED job lights with pre-glow and afterglow features

Ergonomic soft rubber grip design for vibration absorption and comfortable operation

Specification:

Max Torque (Nm): 175

Brake Type: Electric

LED Job Light: Yes / Twin / Pre-glow / After-glow

Battery Capacity Indicator: No

Battery Compatibility: 18v Lithium-Ion (LXT)

Rotation: Forward & Reverse

Variable Speed Control Trigger: Yes / + 3-Stage Impact Power Selection

No Load Speed (RPM): H: 0-3600 / M: 0-2100 / S: 0-1100

Machine Screw Capacity: M4-M8

Standard Bolt Capacity: M5-M16

High Tensile Bolt Capacity: M5-M14

Coarse Thread Length Capacity (mm): 22-125

Max. Impacts Per Minute (ipm): H: 0-3800 / M: 0-2600 / L: 0-1100

Driving Shank: 1/4" Hex

Overall Length (mm): 117

Net Weight (Kg with 1.5/2Ah Battery): 1.2

Net Weight (Kg with 3/4/5Ah Battery): 1.4

Brushless Motor: Yes

 

Makita DGA456 18v Brushless Angle Grinder Features:

Brushless motor

High power motor

Anti-restart function

Soft start feature

Battery fuel gauge

Rubberised soft grip

Electronic current limiter for overload protection

Slide switch conveniently located for one hand operation

Specification:

Battery Type: Lithium-ion

Voltage: 18v

Bore Diameter: 22.23 mm

Max Wheel Thickness: 6 mm

Max Wheel Diameter: 115 mm

No Load Speed: 8,500 rpm

Net weight: 2.6 kg

 

Makita DHR242 18v Brushless SDS+ Drill Features:

Able to drill in concrete as fast or faster than 24V Cordless Combination Hammer model BHR200

One touch slide chuck for SDS-plus bit

Easy-to-grip handle

Ergonomically designed to give maximum power thrust

Provides a sure and comfortable grip in any operation; overhead application, drilling with palm-up or palm-down grip

3 mode operation: Rotation + Hammering, Hammering only & Rotation only

The tool body is separated into the upper and lower housings at the foot of handle portion where the housings are jointed with vibration absorbing cushion rubbers

Higher productivity than model BHR202 achieved by using efficient Brushless DC motor to reduce energy loss by 30% giving longer run times between battery charges

Unique rubber joint construction suppresses the transmission of vibration to battery terminals, minimizing battery failures such as terminal breakage or poor electrical contact

Specification:

Max in Steel: 13mm

Max in Wood: 27mm

Max in Concrete: 24mm

No Load Speed: 0-950rpm

Blows per minute: 0-4,700bpm

Single impact energy: 2.4J

Vibration: 15/sec2

Charging Time: Approx 22 min

 

Makita DML802 18v LED Torch Features:

The 18V LXT Lithium-Ion L.E.D. Flashlight (model DML802) provides bright illumination, versatility, and convenience.