Dewalt DCK2071P2T 18V XR SDS+ Plus Hammer Drill & Combi Drill Twin Kit With 2 X 5.0ah Batteries

Kits Includes:

1 x DCH133 SDS+ Plus Hammer Drill

1 x Side Handle

1 x Depth Stop

1 x DCD796 Combi Drill

1 x Belt Clip

2 x 5.0Ah XR Li-Ion Batteries

1 x DCB115 Multi-Voltage XR Charger

2 x TSTAK Carry Cases

The DeWalt DCK2071P2T XR Brushless Twin Pack contains the following: 1x DCH133 SDS+ Plus Hammer Drill & 1x DCD796N Combi Drill, plus 2x 5.0Ah Batteries, 1x DCB115 Charger & 2x TSTAK carry cases.

Dewalt DCH133 SDS+ Plus Rotary Hammer Drill

The Brushless DeWalt DCH133 SDS+ Rotary Hammer Drill is ideal for many applications, specifically drilling anchor and fixing holes into concrete, brick & masonry. It features a drill stop mode for stopping the rotation, allowing for light chiselling in drywall; tiles and render. The DCH133 also features an impact stop mode for drilling in wood and metal.

Features:

Highly efficient brushless motor

Ideal for drilling anchors and fixing holes into concrete, brick and masonry

Rotation stop mode for light chiselling in plaster, tiles and render and impact stop mode for rotary only drilling in wood and metal

4.0Ah 18 Volt XR Lithium-Ion battery, delivers high performance, long life and maximum runtime

Ergonomic soft grip handle

2.6 Joules of impact energy

Compact and lightweight

Specification:

Voltage: 18v XR

Battery Capacity: 4.0 Ah

No Load Speed: 0-1500 rpm

Impact Energy (EPTA 05/2009): 2.6 J

Blows per Minute: 0-5500 bpm

Max. Drilling Capacity in Wood: 30 mm

Max. Drilling Capacity in Metal: 13 mm

Max. Drilling Capacity in Concrete: 26 mm

Core Drill Capacity in Soft Brick: 50 mm

Tool Holder: SDS-Plus

Collar Diameter: 43 mm

Weight (excl. Battery): 2.27 kg

 

Noise & Vibration:

Sound Pressure (Hammer Drill Mode): 84 dB(A)

Sound Pressure Uncertainty (Hammer Drill Mode): 3 dB(A)

Sound Power (Hammer Drill Mode): 95 dB(A)

Sound Power Uncertainty (Hammer Drill Mode): 3 dB(A)

Vibration - Drilling into Concrete: 14.5 m/s²

Vibration - Chiselling: 14 m/s²

Vibration - Drilling into Metal: <2.5 m/s²

Vibration - Screw Driving without Impact: <2.5 m/s²

Uncertainty K (Vibration): 1.5 m/s²

 

Dewalt DCD796N Combi Drill

The new DeWalt DCD796 compact combi hammer drill featuring brushless technology is up to 30% more powerful than the DCD795 with 460 Units Watts Out (UWO).

Features:

Brushless Motor Technology for excellent efficiency

Ultra compact, lightweight design allows use in confined spaces

Two speed all metal transmission for increased runtime and longer tool life

Drill Driver and Hammer feature for multiple applications

15 position adjustable torque control for consistent screw driving into a variety of materials

Intelligent trigger design allows for total control of application

Improved ergonomic design with rubber grip over mould improving users comfort

Improved air flow to the motor for cooler electronics and incrreased power

3 position super bright LED light

Li-Ion battery packs allows for superior insertion and removal with state of charge indicator

Specification:

Voltage: 18v

Power Output (W): 460

Soft Application Max Torque (Nm): 27

Hard Application Max Torque (Nm): 70

Torque Settings: 15 + Drill

Brake Type: Electric

No. of Gears: 2

LED Job Light: Yes / Delay / Base-mounted

Battery Capacity Indicator: No

Battery Compatibility: 18v Lithium-Ion (XR)

Rotation: Forward / Reverse

Variable Speed Control Trigger: Yes

No Load Speed (RPM) High: 0-2000

No Load Speed (RPM) Med: N/A

No Load Speed (RPM) Low: 0-550

Chuck Type: 3-Jaw / Single Sleeve Keyless / All Metal

Chuck Capacity (mm): 1.5-13.0

Drill Capacity: Concrete (mm): 13

Drill Capacity: Metal (mm): 13

Drill Capacity: Wood (mm): 40

Impact Rate (BPM) High: 0-34000

Impact Rate (BPM) Med: N/A

Impact Rate (BPM) Low: 0-9350

Overall Length (mm): 190

Net Weight (Approx. Kg) with 1.5/2Ah Batt: 1.6

Net Weight (Approx. Kg) with 3/4/5Ah Batt: 1.8

Brushless Motor: Yes

 

Noise & Vibration:

Sound Pressure Level (LpA): 89 dB (A)

Sound Power Level (LWA): 100 dB (A)

Sound Uncertainty (K): 3 dB (A)

Drilling Concrete Vibration Emission (ah): 11.5 m/s²

Drilling Concrete Vibration Uncertainty (K): 1.6 m/s²

Drilling Metal Vibration Emission (ah): <2.5 m/s²