Makita DLX2214TJ 18v LXT Brushless Combi Drill Impact Driver Kit With 2 x 5.0Ah Li-Ion Batteries

The Makita DHP481 is a best in class cordless heavy duty brushless 18V combi drill Supplied with the best possible ergonomic handle for drill-driver applications. The Makita DTD170 cordless impact driver features a high performance 175Nm brushless motor. The user has the option to choose between the two modes: 'A' or 'T' mode. A mode helps to eliminate 'screw cam out' and 'cross threading' by driving at low speed unit screw begins to tighten. T mode the fastening mode for self drilling screws. When fastening screws in the Assist mode the driver starts slowly in order to stabilise the screw before the trigger is fully depressed. Assist mode is perfect for timber drilling, and Tex mode for metal drilling.

DHP481 Combi Drill Features:
Forward/reverse rotation
Single sleeve keyless chuck allows for easy bit installation/removal by one hand
Electric brake
Twin LED job light with afterglow
2 mechanical gears.
Battery fuel gauge
Variable speed control by trigger
Best possible ergonomic handle for drill-driver applications
Compact overall length

Specification DHP481:
Chuck Capacity - 1.5 - 13mm
Blows per Minute (Hi) - 0 - 31,500ipm
Blows per Minute (Lo) - 0 - 8,250ipm
No Load Speed (Hi) 0 - 2100rpm
No Load Speed (Lo) 0 - 550rpm
Voltage - 18v
Max. in wood - 76mm
Max. in masonry - 16mm
Max. in steel - 13mm
Torque Settings - 21 + drill
Battery Type - Lithium-ion
Vibration K factor - 1.5 m/sec²
Maximum Output - 640w
Lock Torque - 125Nm
Max. Fastening Torque (Soft Joint) - 60Nm
Max. Fastening Torque (Hard Joint) - 115Nm
Vibration: Impact drilling into concrete - 6.5 m/sec²
Vibration: Drilling into metal - 2.5 m/sec²
Weight (with batteries) - 2.7 kg

DTD170 Impact Driver Features:
4 stage impact power selection
Twin High Brightness LED light
One touch bit installation
Ergonomically designed rubberised soft grip
Compact At Just 117mm Long
Lightweight At Just 1.2kg

Specification DTD170:
Drive Shank - 6.35mm (1/4") Hex
Impact Rate - 1st - 0-3,800ipm
Impact Rate - 2nd - 0-3,600ipm
Impact Rate - 3rd - 0-2,600ipm
Impact Rate - 4th - 0-1,100ipm
Max Fastening Torque - 175Nm
Net Weight - 1.5kg with BL1860B
No Load Speed - 1st - 0-3,600rpm
No Load Speed - 2nd - 0-3,200rpm
No Load Speed - 3rd - 0-2,100rpm
No Load Speed - 4th - 0-1,100rpm
Specifications - Capacity - Coarse Thread - 22-125mm
Specifications - Capacity - High Tensile Bolt - M5-M14
Specifications - Capacity - Machine Screws - M4-M8
Specifications - Capacity - Standard Bolt - M5-M16

Includes:
1 x DHP481 Combi Drill
1 x DTD170 Impact Driver
2 x BL1850B 5.0AH batteries
1 x DC18RC Charger
1 x Makpac Type 3